RF 2x1 Switch
General Description:
The SRR 070/2x1 provides an A/B switch capable of passing ASI signals. It can be controlled through a front panel keypad as well as through serial and Ethernet interfaces. Standard connectors include F-type and BNC 75 and 50 ohm. Two rear panel mounted DB-9 connectors provide 28 VDC whenever the connector’s associated input is active. In addition, a 10 dB coupler at the switch output provides a monitor port through a rear panel mounted BNC connector.
Features & Benefits:
- Bi-directional signal routing
- Remote control over TCP/IP or serial port
- Redundant AC power
Specifi ations: |
SRR0070 |
Inputs x Outputs: |
2x1 |
Operating Frequency: |
70 ± 20 MHz |
Impedance: |
50 Ω or 75 Ω |
P1dB: |
+13 dBm |
Insertion Loss: |
1 ± 1 dB |
Frequency Response: |
± 1 dB |
Input Return Loss: |
19 dB |
Output Return Loss: |
25 dB |
Isolation: |
> - 60 dB |
Local Control: |
Front Panel Keypad with LCD Display |
RemoteControl: |
RS-232, RS422/485, or TCP/IP Via Customer Supplied PC |
Power Requirements: |
100-240 VAC, 60/50 Hz |
Power Consumption: |
12 W |
RF Connectors: |
Type “F”, BNC, 50 Ω ,75 Ω (BNC Optional) |
ControlModule Connectors: |
RS-232, RS-422/485, or TCP/IP Via Customer-Supplied PC |
Expansion Module Connectors: |
N/A |
Mechanical: |
1 RU: 1.75” H x 19” W x 14” D |