- MODEL No. NJT5118 series
* High Efficiency & Low Distortion
・P1dB: +39 dBm min. over temperature
・IM3: -28 dBc @ Pout = +36 dBm
・Power Consumption: 79 W
* Wide Operating Range
of DC Power Operation
・Voltage Range: +18 to +60 VDC
* Compact Size & Light Weight
・Weight: 3.2kg
* LED Indicator
* RoHS Compliance
|
ModelNo. |
RF Frequency |
LocalFrequency |
IF Frequency |
OutputPower @ P1dB |
IF Connector |
PowerSupply |
PortforVoltageInput |
LED Indicator |
|
NJT5118N |
14.0 to 14.5 GHz (Standard Ku-band) |
13.05 GHz |
950 to 1,450 MHz |
8W Linear (+39 dBm min.) |
N-type |
DC Power +24/+48 VDC (+18 to +60 VDC) |
Same as IF Connector |
Equipped |
|
NJT5118F |
F-type |
|||||||
|
NJT5118NM |
N-type |
MS Connector (Separate Port) |
||||||
|
NJT5118FM |
F-type |
|||||||
|
NJT5118NA |
N-type |
AC Power Option |
IF Connector Supplied by AC PSU |
|||||
|
NJT5118FA |
F-type |
|
Item |
Specifications |
|
|
Output Interface |
Waveguide, WR75 (with Groove) |
|
|
Input Interface |
N-type, female (50 ohm) [N-type IF Connector Model] |
|
|
F-type, female (75 ohm) [F-type IF Connector Model] |
||
|
Output Power @ 1 dB G.C.P. |
+39 dBm min. over temperature |
|
|
ACPR |
-28 dBc typ. @ Pout = +38 dB |
|
|
Linear Gain |
65 dB nom., 59 dB min. |
|
|
Requirement for External Reference |
[Frequency] |
10 MHz (sine-wave) |
|
[Input Power] |
-5 to +5 dBm @ Input port |
|
|
[Phase Noise] |
-125 dBc/Hz max. @ 100 Hz |
|
|
-135 dBc/Hz max. @ 1 kHz |
||
|
-140 dBc/Hz max. @ 10 kHz |
||
|
L.O. Phase Noise |
-60 dBc/Hz max. @ 100 Hz |
|
|
-70 dBc/Hz max. @ 1 kHz |
||
|
-80 dBc/Hz max. @ 10 kHz |
||
|
-90 dBc/Hz max. @ 100 kHz |
||
|
-100 dBc/Hz max. @ 1 MHz |
||
|
Receive Band Noise Density |
-156 dBm/Hz max. @10.95 to 12.75 GHz, @ Pout <= +39 dBm |
|
|
Input V.S.W.R. |
2 : 1 max. |
|
|
Output V.S.W.R. |
2 : 1 max. |
|
|
Power Requirement |
+18 to +60 VDC Power |
|
|
Power Consumption |
79 W typ., 90 W max. |
|
|
Mute |
Shut off the HPA in case of L.O. unlocked or no 10 MHz reference signal |
|
|
LED Indicator |
GREEN: L.O. locked / RED: L.O. unlocked or no 10 MHz reference signal |
|
|
Temperature Range (ambient) |
[Operating] [Storage] |
-40 to +55 °C |
|
-40 to +75 °C |
||
|
Waterproof/Dustproof (IP Code) |
IP 67 |
|
|
Dimension & Housing |
219.5 mm (L) x 175 mm (W) x 99 mm (H) [8.64” (L) x 6.89” (W) x 3.90” (H)] ( without Interface Connectors and Screws ) |
|
|
Weight |
3.2 kg [7.0 lbs] |
|
* The features of 150W AC/DC Power Supply Unit (PSU) is to provide the stable +48V DC power to operate Ku-band 8W BUCs, even if inner power supply of the modem is not capable enough to operate these BUCs.
* The AC/DC box, which is having enough power supply of 150W as well as having the bias-tee which enable to pass 10MHz reference signal and L-band IF signal from the modem, is operated by AC Power and enable to operate these BUCs.
* In addition, the aluminum housing with corrosion-proof treatment on the surface is employed with the box to use perfectly as the indoor unit.
|
Item |
Specifications |
|
|
Interface |
AC Input |
IEC320-C14 inlet |
|
IF/Ref./(DC) Input |
N-type, female (50 ohm) / F-type, female (75 ohm) |
|
|
IF/Ref./DC Output |
N-type, female (50 ohm) / F-type, female (75 ohm) |
|
|
Input AC Voltage Range |
Rated Range |
100 to 240 VAC |
|
Absolute Maximum Rating |
90 to 264 VAC |
|
|
Input AC Frequency Range |
50 / 60 Hz |
|
|
Output Voltage / Power |
+48 VDC +/- 10 % / 150 W max. |
|
|
Efficiency |
80 % typical at 120 VAC, full load |
|
|
Power Factor |
0.98 typical at 120 VAC, full load |
|
|
IF Frequency |
950 to 1,700 MHz |
|
|
IF Insertion Loss |
1 dB max. |
|
|
IF Input/Output VSWR |
1.5 : 1 max. |
|
|
Standard |
EN55022, EN55024, EN60950-1, EN61000-3-2/3, EN62311 |
|
|
Temperature Range (ambient) |
0 to +50 °C (operating), -30 to +85 °C (storage) |
|
|
Cooling |
Forced Air by Fan |
|
|
Dimension & Housing ( without Interface Connectors / Switch) |
290 mm (W) x 230 mm (D) x 44 mm (H) |
|
|
[11.41" (W) x 9.06" (D) x 1.73" (H)] |
||
|
Weight (without Cable) |
1.6 kg [3.5 lbs] |
|
|
Accessories |
Coaxial cable of 1 m, AC power cable of 1 m, 1U rack mount kit (Option) |
|
