The Unit (5W Ka-band SSPA with Upconverter, a weatherized housing for outdoor use) upconverts L-band IF signal to Ka-band RF signal (29.0 to 30.0 GHz) and covers linearity at 5W (+37 dBm) output and phase noise for potential 16-APSK support with operation temperature of up to 73 °C.
* Capability of supporting 5W minimum output power at 8PSK modulated carrier
* Filter switch matrix equipped to suppress spurious in order to comply with ETSI requirements
* Reliable All-weather Performance
ModelNo. |
RF Frequency |
LocalFrequency |
IF Frequency |
Output Power |
M&C |
PowerSupply |
NJT5830 |
29.000to 30.000 GHz |
28.050GHz |
950to 1,950 MHz |
5 W Linear (+37dBm) |
RS-422 M&CEquipped |
+18to+51V DC Power |
Item |
Specifications |
|
Output Interface |
Waveguide, WR28 with O-ring Groove |
|
Input Interface |
[IF / Ref.] |
Coaxial Connector, N-type female connector (50 ohm) |
[Power / M&C] |
PT02E-14-12P (12 pin Circular connector) |
|
Maximum Operational Power (MOP) |
+37.0 dBm min. [QPSK or 8PSK with 1Msps, α=0.2] +36.0 dBm min. [BPSK with 1Msps, α=0.2] |
|
ACPR |
-20 dBc max. @ MOP |
|
Conversion Linear Gain |
58 dB min., 66 dB max. |
|
Requirement for External Reference |
[Frequency] |
50 MHz (sine-wave) |
[Input Power] |
-7 to +5 dBm @ Input port |
|
[Phase Noise] |
-105 dBc/Hz max. @ 100 Hz, -130 dBc/Hz max. @ 1 kHz, |
|
Integrated Phase Jitter (DSB) |
1.5 degree RMS (1kHz – 1MHz) |
|
IF Input VSWR |
2 : 1 max. |
|
RF Output VSWR |
2 : 1 max. |
|
Power Requirement |
+18 to +51 V DC Power |
|
Power Consumption |
88 W max. including BUC Fans |
|
Temperature |
Operational Temperature: -40 to +73 °C |
|
Storage Temperature: -40 to +85 °C |
||
Waterproofing (IP code) |
IP65 |
|
Dimension & Housing |
180 (L) x 100 mm (W) x 50 mm (H) [7.09” (L) x 39.4” (W) x 1.97” (H)] excluding connectors and mounting ears |
|
Weight |
1.6 kg [3.5 lbs] |
|
MTBF |
100,000 hours min. at +40 °C with fans. |